Specification:

• Brand: Ovonic
• Chemistry: Li-Polymer(LiPo)
• Configuration: 3S1P
• Voltage(V): 11.1V
• Capacity(mAh): 6700mAh
• Discharge Rate: 120C
• Max Burst Discharge Rate: 240C
• Length(dev.5mm): 156mm
• Width(dev.2mm): 46mm
• Height(dev.2mm): 30mm
• Net Weight(dev.20g): 492g for 1 Pack
• Discharge Connector Type: EC5
• Balance Connector Type: JST-XH-4P

Ovonic Rebel 120C 3S 6700mAh 11.1V LiPo Battery with EC5 Plug is compatible with 1/8 1/10 Scale Vehicles RC Car Trucks Truggy. Fits the Losi Tenacity DB Pro perfectly. Has about 1mm of wiggle room on length. This is the best 3s pack in these physical dimensions, 6500mah and 120c. Both came at 3.8v and packaged well.
6S Lipo Battery 120C with good discharge characteristics, high energy density/voltage, high discharge rate, good storage, and high RC Racing performance. It provides a more steady discharge curve, and a higher discharge rate to reach the top speed with the most stability and power for your RC hobbies.

Features:

• Lightweight, long cycle life, no "memory effect".
• High power battery and high capacity provide your RC model with more energy and more enjoyment.
• A high Discharge rate, make your RC vehicle work powerfully.

Compatible with:

Ovonic Rebel 11.1V 120C 6700mah RC Lipo Battery is compatible with RC models,1/8 and 1/10 RC car, Losi, TRA Slash, Team Associated, Axial, Tamiya, Duratrax, HPI Strada XB 1/10 RTR Electric Buggy, Jammin, Redcat Racing, Exceed RC, Electrix, Emaxx, Bandit, Rustler version, etc. (Only if the voltage, dimension, and the plug match, then it will fit).

Package Content

• 1×Ovonic 120C 11.1V lipo 3s 6700mah battery with EC5 Plug
• 1×User Manual

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3. To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.